Skip to content Skip to footer

Eliminate gearbox failure

Share on facebook
Share on twitter
Share on linkedin

Gearbox failure on cooling tower fan applications is eliminated with an ABB motor-drive package designed specifically for such hot and humid operating environments.

A traditional cooling tower drive system consists of an AC motor, a gearbox, pillow block bearings and shaft couplings to achieve the air flow required. Any one of these mechanical components runs the risk of failure through regular daily use, together with the extreme environment. Fitting a permanent magnet motor, with variable-speed control, directly coupled to the fan eliminates all of these mechanical devices, thereby reducing purchase and maintenance costs.

Significant energy savings, typically greater than 10% will also be achieved through the elimination of the gearbox and drive train components. Even greater energy savings will be achieved by using the variable-speed drive to reduce speed when the tower is at lower load.

The ABB motor-drive package for cooling towers comprises an ABB permanent magnet motor with an ABB industrial drive, ACS880. The ABB drive is used to establish an optimum speed set point and allows a trickle current to flow to the motor to prevent the fan from wind milling when not in operation. 

Together, the motor and drive combination delivers precise fan control without the need for a gearbox, even under low load or speed conditions often experienced in cooling tower applications.

ABB

01925 741111

www.abb.co.uk/energy

Show CommentsClose Comments

Leave a comment