DANLERS new resistive load (RESLOADE) is designed to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps or dimmable transformers. Although RESLOADE is designed and tested for use with DANLERS trailing edge dimmers, it is also suitable for use with some other manufacturers dimmers.
RESLOADE has an operating temperature of approximately 40°C above ambient and has an effective load of 10W. It is easy to install and with its new design (dimensions 75 x 60 x 37mm) can easily pass through a 63mm ceiling cut out.
For more information:
Tel: 01249 443377
Fax: 01249 443388
Email: [email protected]
Website: www.danlers.co.uk
