Testing times for power consumption
With a greater emphasis on energy conservation than at any time in our past, electrical equipment manufacturers not only have to monitor the power consumed by their products while in operation but also when in standby mode or even switched off.
The EuP Directive 2005/32/EC covers the eco-design requirements of energy using products (EuP). Regulations controlling the design of electrical products will soon become EU law; manufacturers will then have a short period of time to redesign their products and meet mandatory standards.
Hioki's Power HiTester 3332, 3333 and 3334 are ready to meet this monitoring requirement, measuring electrical power consumption under normal running conditions and in standby mode.
GMC Instrumentation
01543 469511
www.gmciuk.com
mark.stabler@gmciuk.com
Recommended Reading
Are building operators owning their systems – or just renting access?
Who really controls a building once it is operational? Chris Timmins of IOTech Systems explores the growing case for open, edge-led systems.
ABB could have a big role to play in Rolls-Royce's SMR deployment
The exploratory MoU comes as site-specific design advances for the first three planned UK units at Wylfa.
Can automation help electrical contractors stop delays before they start?
Greg Edge, Managing Director at Edge Electrical Solutions, explores how structured data and automation can help contractors prevent costly delays.