Type 2 Surge arrester for Ethernet based interfaces
The DEHNpatch product series for RJ45 connections has been supplemented by another arrester. DEHNpatch Class D is a surge arrester for protecting Ethernet-based interfaces in structured cabling systems according to class D up to 100 MHz. This arrester is ideally suited for use in telecom and data networks such as PV systems, wind turbines, IP camera systems and Ethernet / PoE applications up to 1 Gbit/s.
Ideally suited for retrofit protection of all lines
▪ For use in structured cabling systems according to class D up to 100 MHz
▪ Power over Ethernet (PoE+ according to IEEE 802.3at)
▪ For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 2 and higher
D1 Lightning impulse current (10/350 μs) per line (Iimp) 0.5 kA
DEHN
01484 859111
Recommended Reading
Can automation help electrical contractors stop delays before they start?
Greg Edge, Managing Director at Edge Electrical Solutions, explores how structured data and automation can help contractors prevent costly delays.
Data centre pipeline exposes regional mismatch in electrical workforce
Planning analysis finds Wales has attracted 13% of recent data centre applications despite accounting for around 4% of Britain’s electrical workforce.
Is uncomfortable PPE putting compliance at risk?
Alsico's David Ward looks at how better PPE comfort, communication and worker engagement could improve compliance and workplace safety.