Seamless integration of energy harvesting wireless technology in IP networks creates whole new possibilities for building automation
Internet protocol (IP) has now become a worldwide standard for data communication between all manner of devices over the Internet. Currently there is much discussion surrounding the idea of assigning every outlet and every filament lamp its own IP address and then connecting them over the Internet. What many do not know is that today already all electric loads can be addressed over an IP network - enabled by batteryless wireless technology and matching access points.
EnOcean's wireless solutions harvest the power they need from their surroundings - from motion, light or temperature differences - and in this way enable entirely energy-autonomous and maintenance-free automation applications. Power obtained from the surrounding environment suffices to transmit a wireless signal and turn on a light, for example. Teamed with the TCP/IP protocol the user can take advantage of the possibilities provided by established building automation systems. Batteryless wireless technology means cost-savings in installation, huge simplification of the cabling of a building, and flexible configuration of space, because no new cabling is needed if room divisions are altered later on.
New building and renovating with batteryless wireless technology
With the intention of adding a new building to a retirement home, the operators envisaged the following: firstly, no light switches in the entire building; secondly, numerous, easily accessible and batteryless emergency buttons ; thirdly, automatic turn off of electric loads in apartments when occupants are absent; and fourthly, control by staff using a smartphone or iPad. In addition, they wanted staff to be able to receive alarm messages during the night from the adjoining building complex. Subsequently, the operators were sold on the idea of being able to implement all this using a straightforward, batteryless wireless solution.
In the initial installation phase, wireless technology is being installed in the new building of the retirement home. Following that, the existing, adjoining buildings will be converted. All public areas will be fitted with combined presence sensors for light and temperature. These, together with LED beamers, will ensure that lighting is always optimal in corridors, recreation rooms, restrooms, kitchens, cafeteria and other spaces inthe buildings. At the same time, these presence detectors will save energy because lights automatically turn off in rooms when they are unoccupied. When a carer or resident enters a room, light will be increased sufficiently to produce optimum visibility.
In the future, the apartments will no longer have mechanical keys. Every resident will be given a plastic card integrating an individual, contactless RFID chip that opens the door to the resident's own apartment as well as to all public areas. The cards of carer staff have extended rights. When a resident is in their apartment, they only have to insert the chip card in the holder next to the door and electric appliances will be powered immediately. Removing the card will turn off lights and critical loads such as a cooking hobs. Electrically powered shutters outside can also be automatically manipulated. The wireless technology and visualisation software enable staff to supervise the status of all loads, as well as windows and doors, so they know at all times which windows and doors are open, how warm it is in individual apartments, and whether shutters are up or down. In this way, any serious deviation from normal daily routine becomes visible. For residents, this supervision is unobtrusive, and assures maximum, comfort, convenience and security.
Internet enters the scene
In order to fully automate the retirement home, software from BSC Computer, with its high-grade and stringent IP-oriented architecture, is required. The software allows an unlimited number of sensors to be linked and is easily expanded. Installed on all floors of the new building are EnOcean access points with a LAN interface. These have their own processor and memory for 3,000 EnOcean telegrams. In this way no sensor signal is lost, even if the network or the building computer suddenly or briefly fails. An access point uses TCP/IP, not a Com interface over the Ethernet. The system can consequently work at a high processing speed, even on a large number of sensors. Every action is saved in an SQL database, so this documents - for legal certainty - the time between an emergency call and the arrival of a carer. Access points are located on the ceiling in the corridors, and each covers an area of about 750 sqm. They communicate with the central processor by Cat7 Ethernet LAN. The local networks of the individual buildings are independent of one another, and each has its own processor for safety reasons. An encoded IP link enables the networks of the two buildings to connect to one another. That satisfies an important customer requirement: If the nighttime carer in one building happens to be busy with an occupant, the staff of the other building can take over supervision on their monitor. Another major component is iPads for the staff, joined by WLAN to the overall system. That enables all chores to be handled with a single device, including retrieval and updating of resident documentation, ordering of material, selection of midday menu, telephony by SIP protocol, building management plus visualisation of corridor and door cameras.
Short telegrams for full figures
The operator intends to implement this innovative technology in further residential homes in the European Union. Given the European wide availability of smart meters for electricity, gas, water and district heating, such batteryless sensor networks can easily handle other tasks. They are ideal for metering consumption data and sending them to a central interface. The BSC software monitors and displays meter readings and compares them to set figures. All terminal devices (metres, sensors, actuators) can then be connected to a wide-area interface and the data delivered to the utility over the Internet. Both access and data communications are secured by a high degree of encryption.
Optimal combination for building automation
Together, EnOcean technology and IP create solutions. EnOcean enabled devices are highly flexible in their positioning, and are maintenance-free too, needing neither cables nor batteries.
They possess a unique ID address, so they can be integrated seamlessly in an IP network through an access point. That eliminates any elaborate, extra web server solutions for each sensor and actuator, which would be needed for native IP addressing of sensors and actuators. This means a legacy network can be easily merged with energy harvesting technology to benefit from all the attractive advantages. The user is rewarded with more flexibility, comfort and convenience, accompanied by low installation costs and reduced power needs.